makerfocus

Large torque 130 geared motor DIY smart robot car DC motor(pack of 10) Features:1.Voltage DC 3 V-6 V2.Reduction ratio 1:483.3 V-170ma 115rpm 0.7 kgf. cm torque4.Size 64.2 x 22.5 x 22.5 mm without shaft)5.For DIY robot toy car chassis modelSpecification:Rate voltage: DC 3V-6VReduction ratio:...

LDROBERT Triangulation LiDAR LD14 Specification:Model: LD14Appearance: Belt built-in, anti-tangle (hair, etc.)Size: 96.3*59.8*38.8mmMotor: brushedWeight: 131g, compact and portableScanning frequency: 6HZRanging range: 0.15-8 metersRanging frequency: 3000HZAngular resolution: 1°Scanning angle: 360°Laser safety class: FDAClass Package Included:1*Triangulation LiDAR LD14

Lipo Battery 3.7V 2000mAh 1S 1C Rechargeable Lithium Battery with Protection Board, Rubber Insulation Tape and Micro JST 1.25 Plug for Arduino Node MCU ESP32 Development Board (4pcs) About this item Note - The maximum working current of this 3.7v 2000mAh lipo battery is...

Product descriptionThis 3.7V 750mAh Lipo battery is a replacement battery.Voltage: 3.7VCapacity: 750mAhContinuous discharge rate:25CSize:45*25*9.8mmWeight:20gCaution:Charge the Li-Po battery with a Li-Po battery charger onlyCharge the Li-Po battery on a heat resistant surface alongnspect the Li-Po battery before charging and operatingDo not allow Li-Po cells to...

Description: Brand: LOBOT Product: DIY RC Robot Materials: Metal+Glass Fiber+Electronic Components Battery: 7.4V 2200mAh Lipo Batteries+18650 Battery(included) Using Time: 1200mins Ultrasonic Ranging: 3-200cm Servo: LDX-824 Digital Servo Torque: 17kg.cm@6.8V Servo Size: 39.82*20.09*51.1mm PTZ Rotation: 360° Leg Length: 16cm Body Length: 11.5cm Body Width: 10.5cm...

Description:Brand: LOBOTProduct: DIY Robot CarMain Board: Micro:bitPower By: 3.7V LipoCharging Method: USB ChargingProduct Size: 100*55*100mmPacking Size: 218*156*55mmFeatures:- DIY design, freely to assemble it and help to develop logic thinking and operating ability.- Programmable, player are encouraged to program it youself.- APP Control, including stick...

Description:HTCC-AB02S is a Dev-Board. Already integrated AIR530 GPS module, friendly designed for developers, easy to verify communication solutions.Feature:1. Based on ASR6052, those chips are already integrated the MCU and SX1262;2. LoRaWAN 1.0.2 support;3. Ultra low power design, 50uA in deep sleep;4. Micro USB interface...

Description:LoRa GPS Module LoRaWAN 868 915mHz Development Board LoRa Kit Ultra Low Power Design CP2102 SX1262 ASR6502 Chip with 0.96 inch OLED Display and Antenna for Arduino and Intelligent SceneHTCC-AB02S is a Dev Board. Already integrated AIR530 GPS module, friendly designed for developers, easy...

Featurues1. Perfect compatible with arduino2. CE and FCC certification;3. Based on ASR6502), those chips are already integrated MCU and SX1262;4. LoRaWAN 1.0.2 support5. Ultra low power design, 3.5uA in deep sleep;6. Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;7....

DescriptionLora Module SX1262 LoRaWAN 868 915 mHz IoT Development Board CP2102 ASR6502 MCU 128KB Flash Ultra Low Power Consumption Solar Energy Powered Design with Antenna for Arduino and Intelligent SceneFeaturues1. Perfect compatible with arduino2. CE and FCC certification;3. Based on ASR6502), those chips are...

WiFi Gateway Lorawan Lora Gateway ESP32 Sx1276 Chip 5V Low-Cost HT-M00 Dual Channel 868-915 MHz Built in Antenna Located to Smart Family LoRa ApplicationsLow-cost Dual Channel Gateway - HT-M00 is located to smart family LoRa applications that work with less than 30PCS LoRa nodes....

M5Stack Core2 ESP32 IoT Development Kit M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz...

Description:A palm-sized device, office can be used as a recording pen and timer; out as a GPS recorder can be used; at home can be used as a smoke alarm, camera;This is a new upgrade version which has built-in MPU9250.Connect several lines, but also...

Description: M5GO BOTTOM is apparently the bottom part of M5GO which is a upgrade of basic bottoms, with a larger battery, LOGO-compatilble holes, MICPHONE, LED Bar , two more GROVE PORT and more.For more information, please see the product images.M5GO BOTTOM is the same...

[Compatible With LE GO]: Servo Kit 180° is a 9g servo with LEGO compatible fixed bracket. The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard unit,so that you can easily combine...

M5Stack Official Atom Mate DIY Expansion Kit Adapter Board for Adapting M5StickC Hat Series Flexible Installation Compatible with Atom Matrix Atom LiteUser Guide - PCB DOC: https://github.com/m5stack/m5-structural-design-file/blob/master/PCB/AtomPin.PcbDoc; Video: https://drive.google.com/file/d/1JLViQ4ua4XJdHV9h2RciCW26asR8LKBq/view?usp=sharing; Notice:Please check the Hat pins before using AtomHat, you may need to modify the program...

M5Stack TOUGH is an industrial grade programmable embedded controller. Using ESP 32 main control chip, integrated Wi-Fi and Bluetooth dual-mode solution, equipped with dual-core low-power X tensa 32-bit LX6 microprocessor, main frequency up to 240MHz. Onboard 8M PSRAM + 16M flash memory combination, integrated...

DescriptionM5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich...

Note: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer:WCH 340 product home page: http://www.wch.cn/product/CH340.htmlhttp://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver)http://www.wch.cn/download/CH341SER_MAC_ZIP.htmlhttp://www.wch-ic.com/download/list.asp?id=127 (windows)Features:The pins has been welded, you don't need to solder it by yourself.Fully Compatible...

Description:I2c IIC Serial Oled LCD LED Blue Display Module:Size: 0.96 inchResolution: 128*64Color: BlueViewing angle: greater than 160 degreesSupported platforms: for arduino, 51 series, MSP430 series,STIM32 / 2, SCR chipsLow power consumption: 0.04W during normal operationSupport wide voltage: 3.3V-5V DCWorking temperature: -30-80 degreesVolume: 27MM *...