WiFi Module

ESP32 LoRa Development Board    Description:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b /...

What is it?Deauth detector could detect a Wi-Fi deauthentication attack. Also you can flash any program by yourself.If you do not know what is wifi deauthentication attack.You can have a look here: https://github.com/spacehuhn/esp8266_deautherAfter you know how it works you can also flash deauth program...

M5Stack Core2 ESP32 IoT Development Kit M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz...

DescriptionM5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich...

Lipo Battery 3.7V 2000mAh 1S 1C Rechargeable Lithium Battery with Protection Board, Rubber Insulation Tape and Micro JST 1.25 Plug for Arduino Node MCU ESP32 Development Board (4pcs) About this item Note - The maximum working current of this 3.7v 2000mAh lipo battery is...

MakerFocus Wireless Tracker Integrate UC6580 SX1262 863 923MHz LoRa WiFi Bluetooth ESP32 Development Board with Display for Arduino Intelligent Scene WirelessTracker is a development kit based on ESP32-S3FN8. It combines the SX1262 and LC6580 to provide a fast GNSS solution for the Internet of Things.It can...

WiFi Gateway Lorawan Lora Gateway ESP32 Sx1276 Chip 5V Low-Cost HT-M00 Dual Channel 868-915 MHz Built in Antenna Located to Smart Family LoRa ApplicationsLow-cost Dual Channel Gateway - HT-M00 is located to smart family LoRa applications that work with less than 30PCS LoRa nodes....

Smart Bluetooth Speaker IoT Dev Kit with Dual Core BLE WiFi M5Stack Atom Echo Based on ESP32 Support A2DP BLE 4.0 Play Music Record and Playback, for Arduino, Voice Control and IoT[ Small Programmable Smart Speaker ] - ATOM ECHO based on the M5ATOM...

Description:This is the new serial esp32 module. It is Official M5stack ESP32 Development Board with Built-in 850 mAh Battery for Arduino.Specification:Camera Equipped: NoCompatibility: Fully compatibleAssembly state: Ready to goModel number: M5Stack Battery ModuleModel: M5Stack Battery ModuleBattery: 700 mAh BatteryNW: 24.9gGW: 35.1g [Document Link]:https://github.com/m5stack  ...

Description:A palm-sized device, office can be used as a recording pen and timer; out as a GPS recorder can be used; at home can be used as a smoke alarm, camera;Connect several a few lines, but also do small toys;In addition, it can also...

Description:Camera Module:Camera: OV2640Type: Fisheye lensCamera Resolution: 2 MegapixelArray Size: UXGA 1600 x 1200Power Supply: Core 1.2VDC + 5%Analog: 2.5 ~ 3.0VDCI/O: 1.7V to 3.3VPower Requirements: Active/125 mW (for 15fps, UXGA YUV mode)/140mW (for 15fps, UXGA compressed mode)Standby: 600µATemperature: Operation -30°C to 70°CRange: Stable Image...

 Power switch operation： Power on ：Long press power button for 2 secondsPower on ：Short press power button for 6 secondsNotice:Baudrate supported by M5StickC: 1200 ~115200, 250K, 500K, 750K, 1500KIf you find out your M5StickC couldnâ€t power on without a USB in, it might because...

Note: 1. Connect the battery in the right way! Power cost is around 100mA. If you use two 3500 mAh 18650 battery this board theoretically could work 70 hours.2. Battery isn't included, recommeding using two 3350mAh flat 18650 batteries.What is it?This ESP8266 development board...

Seamuing WiFi Test Tool Deauther Watch V3S ESP8266 ESP07 Programmable Development Board with OLED Display,Type-C Interface, SMA Connector, Silicone Strap Built in 1000mAh Battery for NodeMCU Arduino WHAT IS IT?Deauther Watch V3S is the updated version of the old V3. With the latest Deauther software,...

  Features: It can be used for 0.96 OLED Display ESP32 Lora Kit The 868-915MHz antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. Band definition: 868-915MHz; Connector type: IPEX. Standing wave ratio: < = 1.5; Gain: 3dBi; Maximum...

Product DescriptionESP32 Arduino wireless stick lite is an IoT suite that fully supports the standard LoRaWAN protocol. (Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base...

Features: Data download access to the website: http://www.nodemcu.comThe chip model: CP2102; It is designed to occupy minimal PCB areaESP8266 is a highly integrated chip designed for the needs of a new connected worldIts high degree of on-chip integration allows for minimal external circuitry  ...

Features: ★Guide Video: https://youtu.be/2KGYH-595H0. Github Link: https://github.com/Xinyuan-LilyGo/esp32-camera-bme280.★Protocol: Wi-Fi 802.11 b/g/n Bluetooth 4.2 BLE BR/EDR. High sensitivity and low voltage for embedded applications. Standard SCCB interface, compatible with IIC interface.★Support RGB (RGB565/RGB555), GRB422, YUV (422/420) and YCbCr (422) output formats. Support image zoom, pan and...

Description:Now, the 18650-battery shield has been updated to V3.You can use this battery to shield power many products like Raspberry Pi or Arduino.In this version 18650 shield has a protection.Output current can reach 1A, I believe this will be useful for the project.Features:Battery protection(Over...

Description:ESP8266,ESP-12FWIFI Development Board4M bytesThis is D1 mini, it is a mini WIFI board based on ESP-8266EX.11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wiresupported(except D0)1 analog input(3.3V max input)1 Micro USB connectionHow to get started in Arduino:Setup driver:1. Before you use miniD1 boards, you need...