ESP32

ESP32 LoRa Development Board    Description:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b /...

DescriptionM5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich...

MakerFocus Wireless Tracker Integrate UC6580 SX1262 863 923MHz LoRa WiFi Bluetooth ESP32 Development Board with Display for Arduino Intelligent Scene WirelessTracker is a development kit based on ESP32-S3FN8. It combines the SX1262 and LC6580 to provide a fast GNSS solution for the Internet of Things.It can...

WiFi Gateway Lorawan Lora Gateway ESP32 Sx1276 Chip 5V Low-Cost HT-M00 Dual Channel 868-915 MHz Built in Antenna Located to Smart Family LoRa ApplicationsLow-cost Dual Channel Gateway - HT-M00 is located to smart family LoRa applications that work with less than 30PCS LoRa nodes....

Description:Camera Module:Camera: OV2640Type: Fisheye lensCamera Resolution: 2 MegapixelArray Size: UXGA 1600 x 1200Power Supply: Core 1.2VDC + 5%Analog: 2.5 ~ 3.0VDCI/O: 1.7V to 3.3VPower Requirements: Active/125 mW (for 15fps, UXGA YUV mode)/140mW (for 15fps, UXGA compressed mode)Standby: 600µATemperature: Operation -30°C to 70°CRange: Stable Image...

  Features: It can be used for 0.96 OLED Display ESP32 Lora Kit The 868-915MHz antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. Band definition: 868-915MHz; Connector type: IPEX. Standing wave ratio: < = 1.5; Gain: 3dBi; Maximum...

Product DescriptionESP32 Arduino wireless stick lite is an IoT suite that fully supports the standard LoRaWAN protocol. (Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base...

Lipo Battery 3.7V 2000mAh 1S 1C Rechargeable Lithium Battery with Protection Board, Rubber Insulation Tape and Micro JST 1.25 Plug for Arduino Node MCU ESP32 Development Board (4pcs) About this item Note - The maximum working current of this 3.7v 2000mAh lipo battery is...

Product descriptionTechnical ParametersMCU: STM32L151CCU6LoRa chip: SX1276LoRa maximum output power: 19dB ± 1dBLoRa bands: EU_433, CN_470_510, EU_863_870, US_902_928 (four bands optional)Hardware Resource: USART x3; SPI x2; I2Cx2; I2S x2; USB2.0 x1, 12–bits ADC; 12–bits DAC, DMA controller, 38 general GPIOInterface: Micro USB x1; LoRa antenna(SMA)...

Description:ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.The entire solution is the least amount of PCB area.This board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power...

Features: The 433MHz spring antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. It can be used for 0.96 OLED Display ESP32 Lora develpment board. (Purchase Link: ) 3dBi wireless module digital transmit antenna IPEX 13 U.FL Interface.Central Frequency:...

Specifications:Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz X tensa single-/dual-core 32-bit LX6 microprocessorFLASH: QSPI flash/SRAM, up to 4 x 16 MBSRAM: 520 kB SRAMKEY: Reset, IO32Display: 0.91 SSD1306Power indicator lamp: RedUSB to TTL: CP2104Camera: OV2640  2MegapixelSteering engine: Analog servoOn-board clock: 40MHz crystal oscillator Working voltage: 2.3V-3.6VWorking current: About 160mAWorking...

Description:Now, the 18650-battery shield has been updated to V3.You can use this battery to shield power many products like Raspberry Pi or Arduino.In this version 18650 shield has a protection.Output current can reach 1A, I believe this will be useful for the project.Features:Battery protection(Over...

Barcode Scanner Kit Bluetooth QR Code USB 2D 1D Scanner Module Built-in LED UART / TTL Communication Support ESP32 WiFi for Arduino, Micropython, UIFlow, Cash Register Scanning and Warehouse Inventory[ User Manual ] - QR Code Command: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/atombase/AtomicQR/USER_MANUAL_QR-CODE_EN.docx; Example: For UIFlow: https://github.com/m5stack/M5-ProductExampleCodes/tree/master/AtomBase/AtomicQR/UIFlow; For Arduino:...

Hardware Specifications:Chip: Micro32FLASH: QSPI flash 4MB / PSRAM 8MBSRAM: 520 kB SRAMButton: Reset, IO36Extended Function: VGA, PS/2USB to TTL: CP2104Modular Interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA  pre-amplifierOn-board Clock: 40MHz crystal oscillator Working Voltage: 2.7V-3.6VWorking Current:...

Description:Hardware SpecificationsChipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor Flash: QSPI flash/SRAM, up to 4 x 16 MB Sarm: 520 kB SRAM + 8MBytes External SPRAM Key: Reset Dispaly: IPS Panel ST7789/1.3 Inch Power Indicator Lamp: Red USB to TTL: CP2104 Camera: OV2640 2Megapixel...

ESP32 Camera WiFi+Bluetooth Module 4M PSRAM ESP32 5V Low-Power Dual-core 32-bit CPU with OV2640 2 Million Pixels Camera for Home Smart Device Map Wireless Monitoring and QR Wireless IdentificationFeatures:Low-power dual-core 32-bit CPU for application processorsMain frequency up to 240MHz, computing power up to 600...

Features: ★Guide Video: https://youtu.be/2KGYH-595H0. Github Link: https://github.com/Xinyuan-LilyGo/esp32-camera-bme280.★Protocol: Wi-Fi 802.11 b/g/n Bluetooth 4.2 BLE BR/EDR. High sensitivity and low voltage for embedded applications. Standard SCCB interface, compatible with IIC interface.★Support RGB (RGB565/RGB555), GRB422, YUV (422/420) and YCbCr (422) output formats. Support image zoom, pan and...

MakerFocus Wireless Stick Lite ESP32 Development Board Integrated WiFi Bluetooth LoRa SX1262 LoRaWAN 863/928 MHz Wireless Stick Lite is a development board for WiFi, Bluetooth and LoRa. Because some customers do not need OLED screen when using WiFi LoRa 32, we launched this productWireless Stick Lite is...

Product descriptionSeamuing ESP32 Module 1.3inch OLED Display Development Board DSTIKE Duino BMP180 for Environmental Monitoring, Measuring Altitude and Air Pressure, DIYNote: Before using it, pls download the Document and Code firstly!What is it?It is a ESP32+BMP180+OLED development board. It is fully assembled.What makes it...