Battery

Makerfocus 3.7V 3000mAh Lithium Rechargeable Battery 1S 3C LiPo Battery 103665 with Protection Board Insulated Rubber Tape Note:1. The maximum operating current of this battery is only about 1.5A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other...

Makerfocus 3.7V 1100mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board Insulated Rubber Tape and Micro JST 1.25 Plug for Arduino Nodemcu ESP32 Development Board Note: The maximum operating current of this battery is only about 1.5A, can not be used for...

Features:1. Note: The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.2. This product interface is 1.25 pitch male, it can be matched...

Makerfocus 3.7V 2000mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board Insulated Rubber Tape and Micro JST 1.25 Plug for Arduino Nodemcu ESP32 Development Board Note: The maximum operating current of this battery is only about 1.5A, can not be used for...

Makerfocus 3.7V Lipo Battery 10000mAh Lithium Rechargeable Battery 9065115 with Micro PH2.0 Plug for Raspberry Pi UPS Board Specification:Standard Voltage: 3.7VCapacity: 10000mAhMax Working Current: 3ADimensions(±2mm): 112 * 65 *8.8mm / 4.41 * 2.56 * 0.35inch(L*W*H)Discharge Rate: 1COvercurrent Protection: about 1.8-2.1AType of Connector: PH2.0Weight :...

Product description1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX ConnectorsSpecifications:USB standard power supply interface, simple operation, plug and playONLY support LiPo 3.7V/4.20V 1S batterySupport 0.2A/0.6A charge current by switch buttonUSB...

Description:MakerFocus 10pcs Charging Module with Battery Protection 18650 BMS 5V Micro USB 1A 186 50 Lithium Battery Charging Board Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery.And still retains the input voltage wiring pads,...

Makerfocus 3700mAh 1S 3.7V Rechargeable Batteries Lithium Polymer Battery with JST 2.0A Connector(Pack of 2) Specification:Rated Capacity: 3700mAhRated Voltage: 3.7 VStorage Temperature: -20~+25°CStandard Charging Current: 0.2C (740mA)Maximum Charging Voltage: 4.200±0.020VStandard Discharge Current: 0.2C (740mA)Cut-Off Voltage: 2.750±0.005 VCharging Temperature: 0~45°CDischarge Temperature: -20~+60°CSize:95*33*10mm(L*W*H) Warm Reminder:1. Charging current should...

Product description 2 pcs 3.7V 1600 mAh JST lithium polymer battery with USB charging for JJRC A6 A20 A20W A22 H68 X27C-2 XG183 69608 and 2 JST to Molex battery adapters for vehicles with Molex plugs This 3.7V 1600mAh lithium polymer battery is a...

Features: Standard dimension of Raspberry Pi HAT, and it's compatible with all of the expansion board.Cascading design saves space while powering raspberry pi and expansion boards without affecting GPIO expansion.Support up to 2A quick-charge technology, can rapidly charge full the battery.Can be charged and...

★ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)★ 4 in 1 Charging / Discharging / Lithium Battery...

For Bulk Order

Product descriptionLiPo LiFe Li-Ion NiMH Nicd Cell Meter Digital Battery Capacity Meter Power TesterFeatures:Compatible device: NiCd, NiMH, LiPo, LiFe, Li-ionUse for LiPo LiFe Li-ion NiMH Nicd batteryApplies to check the batteries2.1" screen displayBattery Type: NiCd/NIMH,Li-Po,LiFe,Li-IonCell number: NiCd/NIMH(4-7 Cells),Lithium type(2-7 Cells)Display Mode: Battery cell voltages,total...

6pcs 1S 3.7V 750mAh Lipo Battery 30C with 6-in-1 Charger Molex Plug for Syma X5 X5A X5SW X5C X5C-1 RC Quadcopter Drone Spare Parts6-in-1SmartChargerSpecifications:Input: DC 5V, 0.5~2.5AOutput: DC 4.2V 2.4ABattery Type: LithiumCompatible with most Micro RC Helicopter andamp; Airplane 1S Batteries: Syma X5 X5A...

Battery Level Meter & Digital Voltmeter DC 5-30V 2-Wire Battery Level Indicator & Small Battery Capacity Tester (Pack of 2) Product Parameters:1. Working current: <10mA2. Display mode: LED indicator light3. Refresh speed: 500ms/time4. Appearance size: 46mm*15mm*3mm5. Product model: 46156. Product working voltage: DC5V-30VFunction Description:1....

820mAh 1S 3.7V 653042 Lithium Polymer Battery Lipo Battery with JST 2.0A Connector(Pack of 2) Specification:Basic Information:Rated Capacity: 820mAhRated Voltage: 3.7 VStorage Temperature: -20~+25°CStandard Charging Current: 0.2C (740mA)Maximum Charging Voltage: 4.200±0.020VStandard Discharge Current: 0.2C (740mA)Cut-Off Voltage: 2.750±0.005 VCharging Temperature: 0~45°CDischarge Temperature: -20~+60°CWarm Reminder:1. Charging current should...

Multifunction: Smart digital USB meter can be used to test voltage, current, capacity, temperature, recording charging status etc. LCD data at a glance, detect the 3C equipment you use in real time to avoid accidents.Contains 9 groups of power-off storage function, temporarily stores the...

Specification：1.44 Inch color LCD displayVoltage measurement range:4-24.000VVoltage measurement resolution:0.01VCurrent measurement range:0-5.0000ACurrent measurement resolution:0.001ACapacity accumulation rannge:0-99999mAhVoltage measurement accuracy:±(0.2%+1digit)Energy sccumulation range:0-999.99WhCurrent measurement accuracy:±(0.8%+3digits)Load impedance range:0.8Ω-9999.9ΩTime measurement range:0-99h59min59sTemperature range:-10℃-100℃/0℉-200℉Temperature measurement error:±3℃/±6℉Screen brightness setting:0-5 levelsAuto screen off time:0-9minsVoltage graphing range:0-24.00VCurrent graphing range:-4.000ARefresh rate:2HzQuick charge recognition mode:QC2.0, QC3.0, i...

Product description200A High Precision Power Analyzer andamp; Watt Meter Battery Consumption Performance Monitor with LCD Backlight for RC, Battery, Solar, Wind PowerFeatures:Professional battery tester / Great Performance and Precision/ Backlight Blue LCDIt is convenient to calculate the voltage, current, power, discharge amount and discharge...

Product descriptionNote:1.Please turn off the power switch and unplug the battery connector after use2.DO NOT Attempt to open ,disassemble the battery pack3.DO NOT Crush,puncture,short external contacts or dispose of in the fire or water4.DO NOT Expose to temperature above 60° （140°F）5.DO NOT Overcharging and...