Cart 0

Shop By

Best Sellers

Makerfocus
MakerFocus Raspberry Pi Expansion Board UPS Pack Standard Power Supply -RPi V3P

MakerFocus Raspberry Pi Expansion Board UPS Pack Standard Power Supply -RPi V3P

MakerFocus Raspberry Pi Expansion Board UPS Pack Standard Power Supply - V3P Feature:Battery capacity: 3800mAH Maximumoutput current: 1.8AOutput voltage: 5.1V plusmn; 0.1VDouble USB outputStandard charging current / voltage: 1.0A/5.0VIt can...

Save $2
1000mAh 802540 3.7V Lithium Rechargable Battery

MakerFocus 4pcs 952540 3.7V 1000mAh Battery with JST1.25 Connector Lithium Rechargeable Battery

Features:1. Note: The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that...

Save $7
ESP32 Wifi development board with OLED

MakerFocus ESP32 Development Board with 0.96 Inch OLED WiFi Kit for Arduino ESP8266 NodeMCU

MakerFocus ESP32 Development Board with 0.96 Inch OLED WiFi Kit for Arduino ESP8266 NodeMCU Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip...

Save $6
WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU Programmable Development Board

WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU Programmable Development Board

Description:MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 800mAh Battery with OLED Dispaly, Wristband and 3D Printing CaseDSTIKE Deauther Watch V2What...

Save $6
Raspberry Pi 4 alloy case

MakerFocus Raspberry Pi 4 Aluminum Alloy Case with 5V 0.1A Fan Heat Sink and Screw Driver

Features:1. Can be fixed on objects such as walls and desktopsThe aluminum alloy casing has two aluminum alloy gaskets, which can be screwed to the wall, table top and other...

Save $2
DockerPi Power Board

MakerFocus DockerPi Power Board 20W with Fan Remote Control Compatible with Raspberry Pi 4/3B+

Features: SMPSInput: 12V Typical output: 20W (5V/4A)Absolute output: 25W (5V/5A)3CM quiet cooling fanRemote control safe power (Require Driver)Button control safe power (Require Driver)Recommended to be stacked at the bottomCan stack with...

Save $1.10
GT-U7

MakerFocus GT-U7 GPS Module Compatible with 51 Microcontroller STM32 Arduino UNO R3 and IPEX Antenna

GT-U7 GPS Module   Description:GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO-6M.With a USB interface, you can directly use the phone data...

Save $4
ESP32 Development Board with OLED

MakerFocus ESP32 LoRa Development Board WIFI Bluetooth with 0.96inch OLED Display and 2dBi Antenna

ESP32 LoRa Development Board    Description:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at...

Save $4
2Pcs I2C OLED Display Module

MakerFocus 2Pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module

Description: MakerFocus 2Pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED   Display ModuleOLED display, no need backlight, self-illumination.The display performance is better than the traditional LCD display, also...

Save $3
M5Stack

M5Stack Core2 ESP32 IoT Development Kit

M5Stack Core2 ESP32 IoT Development Kit M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.The...

Save $20
1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade

Product description1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX ConnectorsSpecifications:USB standard power supply interface, simple operation,...

Save $3
M5stack Battery Module for ESP32 Core Development Kit

M5stack Battery Module for ESP32 Core Development Kit

Description:This is the new serial esp32 module. It is Official M5stack ESP32 Development Board with Built-in 850 mAh Battery for Arduino.Specification:Camera Equipped: NoCompatibility: Fully compatibleAssembly state: Ready to goModel number:...
Sold Out
M5Stack ESP32 basic core IoT development kit

Makerfocus M5Stack ESP32 Series Basic Core IoT Development Kit WiFi for Arduino

Description:A palm-sized device, office can be used as a recording pen and timer; out as a GPS recorder can be used; at home can be used as a smoke alarm,...

Save $10
Raspberry Pi 7 inch touch screen

MakerFocus Raspberry Pi 7 Inch Capacitive Touch Screen TFT LCD Display for RPI 4B/3B+ Drive-free

 Raspberry Pi Screen 7 Inch Capacitive Touch Screen TFT LCD    Raspberry Pi Screen 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 1/ 2/...

Save $2.20
Sold Out
2 pcs 3.7V 1600mAh JST lithium polymer battery with USB charging for JJRC A6 A20 A20W A22 H68 X27C-2 XG183 69608

2 pcs 3.7V 1600mAh JST lithium polymer battery with USB charging for JJRC A6 A20 A20W A22 H68 X27C-2 XG183 69608

Product description 2 pcs 3.7V 1600 mAh JST lithium polymer battery with USB charging for JJRC A6 A20 A20W A22 H68 X27C-2 XG183 69608 and 2 JST to Molex battery...

Save $3
RPI 4B expansion Board with fan

MakerFocus Raspberry Pi 4B GPIO Expansion Board with Dual Fan LED Compatible with RPi 4B/3B+/3B/3A+

Cooler for Raspberry pi 4b:Nominal voltage: DC 5VCurrent: 0.2ASize: 65*56*9mmCompaitable with Raspberry Pi 4B/3B+/3B/3A+/2B+/2B/BHeat sink for Raspberry pi 4:Size: 5mm*14mm*14mm/5mm*14mm*14mm/5mm*9mm*9mmMaterial: AlumiumColor: Random colorFunction: The contours of these heat sinks are...

Save $1.70
4 Channel Relay Board Module

MakerFocus 4 Channel Relay Board Module for Raspberry Pi 4B/3 Model B+/Raspberry Pi 3/2 Model B

Product Decription:4 Channel Relay Hat Board For Raspberry Pi is one of the "docker pi" module.It has a 4-channel relay, it is the best choice for smart home projects.This four-channel...

Save $0.80
Wifi Gateway

Lorawan Lora Gateway ESP32 Sx1276 Chip 5V Low-Cost HT-M00 Dual Channel 868-915 MHz Smart Family

WiFi Gateway Lorawan Lora Gateway ESP32 Sx1276 Chip 5V Low-Cost HT-M00 Dual Channel 868-915 MHz Built in Antenna Located to Smart Family LoRa ApplicationsLow-cost Dual Channel Gateway - HT-M00 is...

Save $3.94
1.5 inch OLED module

MakerFocus 1.5inch I2C OLED Display Module for Arduino/Raspberry/Jetson Nano/STM32

Description:This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit grey level, with embedded controller, communicating via SPI or I2C interface. You Can Download the CAD  File Here....

Save $1.01
MAKERFOCUS

MakerFocus Fisheye Camera 5mp IR-CUT Night-vision Camera for Raspberry Pi4B/3B+/3B/2B

 Fisheye Night-vision Camera   Description:The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting...

Save $1.30
x