Raspberry Pi Case Compatible with 3.5 inch Display for RPi 3B/3B+/2B/2B+ with Cooling Fan

  • $9.09
    Unit price per 
  • Save $0.50


Description:

This protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.5inch display;

It provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3.5 inch display.

This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display.

There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don't need to open the case.

It with a compact design, simple and elegant, transparent environmental protection material.

 

Features:

Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!)
Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging.
With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation.
With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.

 

Packing List:

1 * Raspberry Pi Case
3 * Heat Sink
1 * Mini Cooling Fan with screws


We Also Recommend

RPI UPS Pack Standard v2.0

MakerFocus Raspberry Pi Expansion Board UPS Pack Standard Power Supply

Sale price $7.99 Regular price $9.99
Save $2
1000mAh 802540 3.7V Lithium Rechargable Battery

MakerFocus 4pcs 852540 3.7V 1000mAh Battery with JST1.25 Connector Lithium Rechargable Battery

Sale price $18.05 Regular price $18.99
Save $0.94
ESP32 Wifi development board with OLED

MakerFocus ESP32 Development Board with 0.96 Inch OLED WiFi Kit for Arduino ESP8266 NodeMCU

Sale price $11.99 Regular price $16.99
Save $5
2Pcs I2C OLED Display Module

MakerFocus 2Pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module

Regular price $9.99
DockerPi Power Board

MakerFocus DockerPi Power Board 20W with Fan Remote Control Compatible with Raspberry Pi 4/3B+

Sale price $20.89 Regular price $21.99
Save $1.10

x