MakerFocus
-
Vendor:MakerFocus
MakerFocus ESP32 LoRa Development Board WIFI Bluetooth with 0.96inch OLED Display and 2dBi Antenna
ESP32 LoRa Development Board Description:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b /...- $24.99
$29.99- $24.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus ESP32 OLED Development Board WiFi Bluetooth Dual Module with Cable
Description:ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.The entire solution is the least amount of PCB area.This board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power...- $13.49
$14.99- $13.49
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus ESP8266 Development Board DSTIKE WiFi Deauther Mini with 1.3inch OLED Display
What is it?This tiny ESP8266 development board is a small version of WiFi deauther projects. It comes installed with the latest ESP8266 Deauther software.With this software, you can perform different attacks to test WiFi networks.Please note that the ESP8266 does only support 2.4GHz. For...- $21.84
$22.99- $21.84
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus ESP8266 WiFi Deauth Detector V3 (Pre-flashed) with Buzzer RGB LED
What is it?Deauth detector could detect a Wi-Fi deauthentication attack. Also you can flash any program by yourself.If you do not know what is wifi deauthentication attack.You can have a look here: https://github.com/spacehuhn/esp8266_deautherAfter you know how it works you can also flash deauth program...- $19.99
$25.98- $19.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Firefly Photosensitive Robot DIY Kits
Specifications: Size:75*65*75mm Battery type:AAA*2 Power supply:3V Sensor:photoresistance Legs material:PVC Body material:Acrylic Features: Photosensitive Movement The antennae of the robot's head can sense light. When the light hits the left or right antennae, the vibration motors installed on the left or right legs will...- $9.99
- $9.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Fisheye Camera 5mp IR-CUT Night-vision Camera for Raspberry Pi4B/3B+/3B/2B
Fisheye Night-vision Camera Description:The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings are not required, plug-in then it can be used. The advantage is...- $24.69
$25.99- $24.69
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Fisheye Lens Night Vision Camera Adjustable-Focus OV5647 for Raspberry Pi 3B/3B+/2B/2B+
Specifications:Pixel : 5 megapixelSensor : OV5647CMOS size : 1/4inchSensor best resolution : 1080p4 screw holes: used for attachment , connect 3.3V power outputFocal Length : 2.35Diagonal angle : 130 degreeDimension: 25mm x 24mm Feature:1. Fish eye wide angle lens2. Night vision camera3. 5 MP pixel4....- $21.59
$23.99- $21.59
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus GT-U7 GPS Module Compatible with 51 Microcontroller STM32 Arduino UNO R3 and IPEX Antenna
GT-U7 GPS Module Description:GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO-6M.With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.USB directly connected to the computer,...- $15.99
$19.99- $15.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Heart-Rate Sensor Module MAX30100 for Wearable Medical Devices Monitoring Devices
Description:1. MAX30100 is an integrated pul-se oxim-etry and heartrate monitor sensor solution.2. It combines two LEDs, aphotodetector, optimized optics, and low-noise analog signal processing to detect pul-se oxim-etry and heart-ratesignals.3. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down...- $9.95
$13.95- $9.95
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Hex Screwdriver Set Tools Kit (1.5mm 2.0mm 2.5mm 3.0mm)
Do you want a more adaptable tool?This Rc tools kits resistant to stripping and breaking. Simple Design! That will help to improve work efficiency, maintanence, set up and repairing projects allowing you to finish your work well than ever before!Specifications:Item Name: Hex Screwdriver Set...- $13.99
- $13.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Ice Tower Cooler RGB Cooling Fan with Heatsink for Raspberry Pi 4B / 3B+ and 3B
Why design it?According to Moore's law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex. Higher processing performance will generate more heat. This super ICE Tower CPU Cooling Fan for Raspberry Pi is designed for solving...- $21.63
$24.19- $21.63
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Lora Gateway LoraWan Measure Distance 17KM with 868MHz Antenna for Raspberry Pi
Description:The core chip of the HT-M01 LoRa gateway is the SX1301 baseband chip.It's industrial-grade standard LoRa/LoRaWAN gateway module which with high performance and small size. This LoRa Gateway is mainly aimed at wireless sensor networks, Internet of things, embedded applications, it can help customers...- $125.99
$139.99- $125.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Lora SX1262 Module 868 915 MHZ LoRaWAN IoT Development Board with Antenna for Arduino
DescriptionHTCC-AB01 is a new Dev Board, friendly designed for developers, easy to verify communication solutions.It is based on ASR605x (ASR6501, ASR6502), perfectly support for arduino, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels. FeaturuesLoRaWAN 4.4.1 supportUltra low power design, 3.5uA...- $18.39
$19.99- $18.39
- Unit price
- per
-
Vendor:Makerfocus
Makerfocus M5Stack ESP32 Series Basic Core IoT Development Kit WiFi for Arduino
Description:A palm-sized device, office can be used as a recording pen and timer; out as a GPS recorder can be used; at home can be used as a smoke alarm, camera;Connect several a few lines, but also do small toys;In addition, it can also...- $49.99
$59.99- $49.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Meowbit Game Development Board Compatiable with Micro:bit Windows 7 and Above
Product description★ User Manual:https://drive.google.com/file/d/13nT9qukx7jt06-bLQLOxJRyGVi6Lnlpw/view?usp=sharing;★ Makecode ArcadeArcade graphical programming mode : http://aka.ms/MakeCode; micropython programming mode.★ Github: https://github.com/Microsoft/pxt-arcade.★ Youtube: https://www.youtube.com/watch?v=uJJlJ_WFcT0Feature:160 x 128 full color screen.Graphic Gamification ProgrammingExpansion functionRich onboard resourcesMulti-language supportPicture drawing Multi-platform and multi-modeprogramming Programming feature:The Meowbit platform has its own gamification programming. It's burnprocess...- $41.99
$49.99- $41.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Micro:bit Protective Acrylic Transparent Case and AAA Cell Battery Box
Description:Micro:bit Protective Acrylic Transparent Case is developed for BBC Micro:bit Baord.Micro:bit AAA Cell Battery Box comes without batteries, and it's compatible with BBC Micro:bit Board's power connector.Features:Note: BBC Micro:bit Board is not included.Micro:bit Protective Acrylic Transparent Case:Color: transparent, it come with a brown protective film,...- $6.59
$7.99- $6.59
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Micro:bit Starter Kit Without Development Board For Learning and Programming
Description: ElecFreaks Micro:bit Starter Kit is designed for people who is at the door step of learning electric circuit and programming knowledge. You can not only learn basic knowledge of these elements, but also use it to design circuit. With the help of Micro:bit...- $35.71
$37.59- $35.71
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Description: Microcontroller ATmega328POperating Voltage (logic level) 5 VInput Voltage (recommended) 7V-12VDigital I/O Pins 14 (of which 6 provide PWM output)Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader Features:Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For ArduinoFully Compatible to Arduino Nano...- $10.99
$12.99- $10.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Nextion Enhanced Version NX3224K024 2.4 Inch HMI LCD Touch Display
Description:Link Wiki:NoDisplay Resolution:480 * 240Display Interface:SerialScreen Type:Touch ScreenDisplay Controller:NoTFT display interface:N/ADisplay Size:3.2 rdquo;Board Size: 95mm*47.6mmExpand: SD Card Socket , Touch ScreenWeight:75g Features:Support built-in RTCSupport GPIOSD Card interface: support max max 32G Micro TF/SD card (FAT32 file format)Flash data storage space: 16MBEEPROM: 1024 byteRAM: 3584...- $36.99
$48.99- $36.99
- Unit price
- per
-
Vendor:MakerFocus
MakerFocus Nextion NX4024K032 3.2 Inch Touch HMI Display Enhanced Version
MakerFocus Nextion NX4024K032 3.2 Inch Touch HMI Display Enhanced Version Description:Link Wiki:NoDisplay Resolution:480 * 240Display Interface:SerialScreen Type:Touch ScreenDisplay Controller:NoTFT display interface:N/ADisplay Size:3.2 rdquo;Board Size: 95mm*47.6mmExpand: SD Card Socket , Touch ScreenWeight:75g Features:Support built-in RTCSupport GPIOSD Card interface: support max max 32G Micro TF/SD card...- $33.24
$34.99- $33.24
- Unit price
- per




















