Best Sellers

Description:The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately...

This is a metal case specially designed for NVIDIA Jetson Nano Developer Kit,  and it supports power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, and easily assemble it. We recommend that you read the...

Advantage:In comparison with other K210 development board, M5stack K210 Camera features more hardware resources such as a speaker, Microphone, LCD screen, gyroscope, and wireless network implementations. The K210 includes two 64-bit RISC-V CPU cores, each with a built-in independent Float Point Unit.KPU high-performance Convolutional Neural...

Desciption:Are you still worried about the cooling function? Would you like to have a new cooling fan for your NVIDIA Jetson Nano development kit or other device?These new 40mm x 40mm x 10mm cooling fans can help you solve this problem.Feature:1. Cooling the NVIDIA...

Features: Compatible with nodemcu.18650 charging system integration.LED indicator (green for full, red for charging) can be used while charging.Switch control power supply.SMT connector available for sleep modeAdditional LED Programmable (gpio16)0.5a charge current1A outputOvercharge protectionOver discharge protection10 digital pin read / write / interrupt /...

Product Description:LoRaWAN build with RHF76-052 and optional Antennas. RHF76-052 is designed by Ai-Thinker, it is a LoRaWAN UART modem & compatible device, supports LoRaWAN communication. It’s based on the RHF76-052 module and an embeded LoRaWAN stack. You can use M5 core as a host...

MakerFocus Wireless Stick Lite ESP32 Development Board Integrated WiFi Bluetooth LoRa SX1262 LoRaWAN 863/928 MHz Wireless Stick Lite is a development board for WiFi, Bluetooth and LoRa. Because some customers do not need OLED screen when using WiFi LoRa 32, we launched this productWireless Stick Lite is...

Raspberry Pi 4B Case with Fan - Raspberry Pi Aluminum Alloy Case with Heat-sink and Screw Driver for Raspberry Pi 4B Features:1. Aluminum Alloy MaterialHigh hardness, strong pressure resistance, metallic luster, not easy to rust, more conducive to heat dissipation. It can perfectly protect...

M5Stack Official Atom Mate DIY Expansion Kit Adapter Board for Adapting M5StickC Hat Series Flexible Installation Compatible with Atom Matrix Atom LiteUser Guide - PCB DOC: https://github.com/m5stack/m5-structural-design-file/blob/master/PCB/AtomPin.PcbDoc; Video: https://drive.google.com/file/d/1JLViQ4ua4XJdHV9h2RciCW26asR8LKBq/view?usp=sharing; Notice:Please check the Hat pins before using AtomHat, you may need to modify the program...

Product description 2S 7.4 V lithium polymer and charging board jst-ph2.0 3-pin 4.0 mm banana plug 2S lithium polymer battery charging board with banlance charger IMAX vitamin B6, etc.This new parallel charger board allows you to charge up to twelve lithium polymer batteries at...

Product Description5PCS JST-XH 2S 3S 4S 5S 6S LiPo Battery Balance Charger Extension Cable, Balance Charging Extension Wire Cable Lead adapter for RC Drone , Quadcopter and Multirotors (22AWG)Specification:Product Name: Battery charge extension cableLength: Approx.20cm/7.87inchesWire Type: 22AWG silicone wireMain Color: Black, RedFive Specification: 3PIN...

Product description12 Gauge Silicone Wire16.4 Feet (8.2 Feet Black and 8.2 Feet Red) Soft and Flexible Low Impedance,12 AWG Silicone Wire 680 Strands of 0.08 mm Copper Wire for RC Car, Drone, Airplane Battery etcSize Name:12AWG12 Gauge Silicone Wire 16.4 Feet (8.2 Feet Black...

Test Different Types of BatteryBattery Tester can be used to test the following sizes :1.5V--AAA,HP6,MN2400,RO3,AA,HP7,MN1500,UM3 C,HP11,MN1400,UM2,D,HP2,MN1300,UM1 and Cell Button Type batteries.9V--- PP3,MN1604,6F22,006PEasy to ReadRed= ReplaceYellow= Low PowerGreen= GoodIdentify battery status simply by the analog display needle. Instant readout makes it A MUST HAVE in...

Product descriptionFeatures：Insert the battery into the aircraft and charge the battery by connecting the Micro USB port on the aircraft to a charger.Specially made for TelloHigh-quality cellsEasy to mountSpecifications：Max Charge Voltage:4.35VSpecifications:Capacity: 1100 mAhVoltage: 3.8 VBattery Type: LipoEnergy: 4.18 WhNet Weight: 26 gOperating Temperature: 5℃...

Product descriptionThis 3.7V 300mAh Lipo battery is a replacement batteryVoltage: 3.7VCapacity: 300mAhContinuous discharge rate:25CSize:34*20*8.5mmWeight:9gCharger for 3.7V Lipo Battery:Advance individual charging method - charges each cell individuallyOvercharge protectionShort-circuit protection Light weightRed Lights on: currently chargingRed Lights off: charging completeSize:40*35*13mmCaution:Charge the Li-Po battery with a Li-Po...

Product descriptionProduct Parameter:Item Name：12V DIGITAL TESTER & CHARGING SYSTEM ANALYZERItem Number：805 A model (Single Connector)Application：12V DIGITAL TESTER fits for Car and MotorcycleVoltage Range：4V-20VWeight：126gBox Size：14.5*4.5*9CM   DescriptionThe 12V Digital Battery Tester voltmeter and charging system Analyzer with LCD display and LED indication provides a quick reading...

The reference link of ESP32 is as follows:2.4GHz Dual Mode WiFi + Bluetooth Development BoardUltra-Low power consumption, works perfectly with the Arduino IDESupport LWIP protocol, FreertosSupportThree Modes: AP, STA, and AP+STAESP32 is a safe, reliable, and scalable to a variety of applicationsThe reference link...

1.Description: It is a high-definition 1.54 inch IPS LCD liquid crystal display module.Its driver chip is ST7789 and SPI output. http://www.lcdwiki.com/1.54inch_IPS_Module2.Feature: 1>.IPS LCD display 2>.High Definition 3>.SPI output 4>.Adjust display direction 5>.Full view3.Parameter: 1>.Product Name:1.54 Inch IPS LCD Liquid Crystal Display Module 2>.Work Voltage:3.3V...

The Raspberry Pi Zero W extends the Pi Zero family. The Pi Zero W has all the functionality of the original Pi Zero, but comes with with added connectivity, consisting of:Technical Specifications802.11 b/g/n wireless LANBluetooth 4.1Bluetooth Low Energy (BLE)Like the Pi Zero, it also...

The Raspberry Pi High Quality Camera is an upgraded 12 megapixel, high sensitivity camera for Raspberry Pi with an adjustable focus aluminium lens mount.Note: A C- or CS-mount lens is essential but not included!It offers higher resolution (12 megapixels instead of 8 megapixels) and...