Products

Description:The M5Stack M5GO is a development kit based on ESP32 chip. You can even program the M5Stack M5GO through Arduino or MicroPython.The M5Stack M5GO equips the ESP32 with everything necessary to program, run and develop on the wonderchip. It also features a Six-Axis (Gyro...

Description: M5GO BOTTOM is apparently the bottom part of M5GO which is a upgrade of basic bottoms, with a larger battery, LOGO-compatilble holes, MICPHONE, LED Bar , two more GROVE PORT and more.For more information, please see the product images.M5GO BOTTOM is the same...

M5Stack M5Stamp C3U Kit de Desarrollo: 2 piezas ESP32-C3 Wi-Fi IoT Placa de Desarrollo Microcontrolador ASIN：B0BF55QQYQ UPC/EAN：B0BF55QQYQ Mantén pulsada la tecla central (G9) de STAMP C3U cuando la alimentación esté apagada. Conecte el computadora, después de que el puerto se reconozca con éxito, grabe...

Description:M5StickC is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It...

Description:M5StickC is a ESP32 development board with 0.96 inch TFT color screen (80 * 160 resolution), Red LED, button, Microphone, IR transmitter, 6-axis IMU (SH200Q) and 80mAH battery. The ESP32 module ESP32-Pico in M5StickC also has a built-in 4MB flash. If the M5StickC is...

 Power switch operation： Power on ：Long press power button for 2 secondsPower on ：Short press power button for 6 secondsNotice:Baudrate supported by M5StickC: 1200 ~115200, 250K, 500K, 750K, 1500KIf you find out your M5StickC couldnâ€t power on without a USB in, it might because...

[Compatible With LE GO]: Servo Kit 180° is a 9g servo with LEGO compatible fixed bracket. The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard unit,so that you can easily combine...

M5Stack Official Atom Mate DIY Expansion Kit Adapter Board for Adapting M5StickC Hat Series Flexible Installation Compatible with Atom Matrix Atom LiteUser Guide - PCB DOC: https://github.com/m5stack/m5-structural-design-file/blob/master/PCB/AtomPin.PcbDoc; Video: https://drive.google.com/file/d/1JLViQ4ua4XJdHV9h2RciCW26asR8LKBq/view?usp=sharing; Notice:Please check the Hat pins before using AtomHat, you may need to modify the program...

Description:CardKB is a unit can implement a full-featured QWERTY keyboard. Consider that you want make some cool stuff that require keyboard typing and interaction, but M5 core it self just have 3 buttons, here comes the flexible and powerful CardKB unit.It also can achieve...

Features:M5Stack official stock proto board is used as a Core Extensions feature. It's a expansion board with double-sided 2 * 15 @ 2.54mm busbar NW: 10gPackage Weight: 0.1kg (0.22lb.)Package size: 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in)Compatibility:All CompatibleModel Number:M5Stack Proto ModuleState of...

Advantage:In comparison with other K210 development board, M5stack K210 Camera features more hardware resources such as a speaker, Microphone, LCD screen, gyroscope, and wireless network implementations. The K210 includes two 64-bit RISC-V CPU cores, each with a built-in independent Float Point Unit.KPU high-performance Convolutional Neural...

M5Stack TOUGH is an industrial grade programmable embedded controller. Using ESP 32 main control chip, integrated Wi-Fi and Bluetooth dual-mode solution, equipped with dual-core low-power X tensa 32-bit LX6 microprocessor, main frequency up to 240MHz. Onboard 8M PSRAM + 16M flash memory combination, integrated...

Description:M5Stack USB is a USB driver module, integrated MAX3421E which adds USB host or peripheral capability to any system with an SPI interface. Ever up for adding the standard USB features on your project?  This M5 moudle is the perfect solution.Series Protocol: SPIFeatures:1x UAB stadard A...

DescriptionM5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich...

Note: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer:WCH 340 product home page: http://www.wch.cn/product/CH340.htmlhttp://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver)http://www.wch.cn/download/CH341SER_MAC_ZIP.htmlhttp://www.wch-ic.com/download/list.asp?id=127 (windows)Features:The pins has been welded, you don't need to solder it by yourself.Fully Compatible...

Makerfire Electromagnetic Experiment Box(Pack of 117) Features:1.Learn basic electrical and magnetic experiments through the full-color manual, understand the basic principles, and help students learn, think and explore. 2.The basic electrical and magnetic experiment kit includes everything you need to get started, and provides the...

Makerfire USB Tester Type C Meter Detector Checker DC 0-30V/0-6.5A Application:Color Display Tester can monitor Voltage, Current, Capacity, Electric Quantity, Power, Temperature, Load Impedance, D+/D- Voltage, Charging Time and other data of USB, and supports Qualcomm QC3.0 compatible QC2.0, BC1.2, iPhone 2.4A and other protocol...

Description:I2c IIC Serial Oled LCD LED Blue Display Module:Size: 0.96 inchResolution: 128*64Color: BlueViewing angle: greater than 160 degreesSupported platforms: for arduino, 51 series, MSP430 series,STIM32 / 2, SCR chipsLow power consumption: 0.04W during normal operationSupport wide voltage: 3.3V-5V DCWorking temperature: -30-80 degreesVolume: 27MM *...

Description:The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately...

Description:This lovely little display breakout is the best way to add a small, colorful and bright display to any project.We've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a...