MakerFocus 5MP OV5647 Camera Built-in IR-Cut Mode Compatible with Raspberry Pi 3B+/3B/2B+/2B
The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings is required!
Note: There is a logo "3MP" on camera, sorry for that it's Mold's error, actually it's 5MP camera.
How do I manually switch between night vision or day mode?
1. The camera works by default in day mode.
2. Run the command: sudo nano /boot/config.txt and add disable_camera_led = 1 on the last line. After saving and restarting the Raspberry Pi, the camera will work in night vision mode. To return to normal mode, simply delete disable_camera_led = 1, save and restart the Raspberry Pi.
Pixels: 5 Megapixels
Photosensitive chip: OV5647
Focal Length: 4 mm
Aperture (F) : 1.2
FOV (Diagonal): 70 degrees
Focal length: adjustable
Sensor optimum resolution: 2592 * 1944p
Support 3.3V power supply
Size: 35 * 35 mm
Product weight: 0.028kg
Infrared Light: can fill flash
Photoresistor: to detect ambient light intensity.
1 * 70 Degree 5MP IR-CUT Infraed Camera
2 * LED Lights
1 * 15cm FFC cable
4 * screws and nuts
We Also Recommend
MakerFocus Raspberry Pi Expansion Board UPS Pack Standard Power Supply(3800mAh Battery)
MakerFocus GT-U7 GPS Module Compatible with 51 Microcontroller STM32 Arduino UNO R3 and IPEX Antenna
MakerFocus Raspberry Pi 4 Aluminum Alloy Case with 5V 0.1A Fan Heat Sink and Screw Driver
MakerFocus Raspberry Pi 4B GPIO Expansion Board with Dual Fan LED Compatible with RPi 4B/3B+/3B/3A+