4pc 3D Printer Fan 12V 0.1A DC 30mx30mx10mm Double Ball Bearing Mini Quiet Cooling Fan
Note: Voltage range: 7V-12V, Starting voltage: 7V, Working Current: 0.01A. When you use them, pls dont exceed this range!! 2. Any problems, pls click seamuing and choose Ask A Question to email us! We will offer you satisfied solution!
With high performance, long life and low noise. Noise: 25 dBA.
Used for cooling on hot end, 3D Printers, DVR or other cooling needs. 30mm Fan - Size: 30mm x 30 mm x 10 mm ; Cable length: 270 mm. Connector: XH2.54.
Double ball bearing
-Rated voltage: DC 12 V; Voltage range: 7 V-12 V; Starting voltage: 7 V; Starting voltage: 7 V; Rated Current: 0.1 A+5% (When you use them, pls don't exceed this range!!)
-Rated Power Consumption: 1.2 W
-Size: 30 mm x 30 mm x 10 mm
-Cable Length: 270 mm
-Temperature range: -10~80 degrees Celsius
-Speed: 7800Â±5% RPM
-Air Volume Flow: 3.55 CFM
-Noise Level: 25 dBA
-Wind pressure: 3.62mmH2O 0.09INH2O
-Wind speed: 0.1 M /S
With high performance, long life and low noise. Noise Level: 25 dBA
Double Ball Bearing, Lifespan: 5000 hours at 40 degrees Celsius
Used for cooling on hot end, 3D Printers, DVR or other cooling needs
Polarity Protection: Open circuit when Vcc and GND are exchanged; When VCC and GND are connected in reverse, it will not burn the circuit board after being pulled out within 5 seconds
2 pins power connector fan for industrial use.
4 * DC 12V 0.01A 30X30X10mm 3D Printing Fan
We Also Recommend
Makerfocus 3.7V 1100mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board (Pack of 4)
Makerfocus 3.7V 2000mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board (Pack of 4)
Makerfocus 3.7V 3000mAh Lithium Rechargeable Battery 1S 3C LiPo Battery (Pack of 4)