2pcs Brushless DC Cooling Fan with XH2.54-2P Wire for 3D Printe

  • $7.09
    Unit price per 
  • Save $2.36


Makerfocus  2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printe (2PCS Blue)

Makerfocus 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printe (2PCS Blue)

[ADVANTAGE]: The hydraulic bearing has improved the non-sealed bottom design of the traditional bearing, effectively preventing the volatilization of lubricating grease and dust from entering the inside of the bearing.
[SPECIFIC PARAMETERS]: Rated voltage: DC 24V; Working voltage: 12-26V; Current: 0.05A; Rated power consumption: 1.2W; Rotating speed: 5000±10%RPM; Noise: 24.4dBA; Air flow: 6.0CFM; Wind speed: 0.2M/S; Size: 40 * 40 * 10 mm.
[WIDE RANGE OF APPLICATIONS]: Suitable for a variety of products: computer, case, CPU, 3D printers, etc. Specially feature: the fan emits blue LED lights when it is turned on.
[WHAT YOU GET]: 4 * 4010 fan 24V. As long as you have any questions about the product, we will resolve your issue immediately if received your email. For any reason you are unsatisfied with our product, please click Innovateking-EU then Ask a question to contact us.
[HIGH QUALITY]: Hydraulic bearings adopts special low-wear, high-temperature resistant grease. The service life can reach 40,000 hours. And it inherits the advantages of low noise of oil-impregnated bearings, and the maintenance-free features of dual ball bearings.

Product description
Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of quiet fan. In a word, it is a highly cost-effective product.

Specification:
Model: 4010 hydraulic bearings fan
Rated Voltage: DC24V
Operation Voltage: DC12V-26V
Consuming Current: 0.05A+5%
Consuming Power: 1.2W
Max. Air Flow: 6.0CFM
Acoustic Noise: 24.4dBA
Rated Speed: 5000±5%RPM
Connector: 2pin-ph2.54
Life Expectance: 40,000 hours
Size: 40x40x10mm

Polarity Protection:
1. When Vcc and GND are reversely connected, there is no conduction.
2. When Vcc and GND are reversely connected, the circuit board will not be burnt if pulled out in 5 seconds.

Package Including
2 * 4010 24V fan


We Also Recommend

MakerFocus DIY Radio FM Receiver Kit

MakerFocus DIY Radio FM Receiver Kit

Sale price $18.99 Regular price $19.99
Save $1
Raspberry Pi 4B Case with Fan - Raspberry Pi Aluminum Alloy Case with Heat-sink and Screw Driver for Raspberry Pi 4B

Raspberry Pi 4B Case with Fan - Raspberry Pi Aluminum Alloy Case with Heat-sink and Screw Driver for Raspberry Pi 4B

Sale price $13.29 Regular price $13.99
Save $0.70
Makerfocus 3.7V Lipo Battery 10000mAh Lithium Rechargeable Battery 9065115 with Micro PH2.0 Plug for Raspberry Pi UPS Board

Makerfocus 3.7V Lipo Battery 10000mAh Lithium Rechargeable Battery 9065115 with Micro PH2.0 Plug for Raspberry Pi UPS Board

Sale price $14.99 Regular price $16.99
Save $2
Makerfocus 3.7V 1100mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board (Pack of 4)

Makerfocus 3.7V 1100mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board (Pack of 4)

Sale price $18.99 Regular price $21.59
Save $2.60
Makerfocus 3.7V 2000mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board (Pack of 4)

Makerfocus 3.7V 2000mAh Lithium Rechargeable Battery 1S 3C Lipo Battery with Protection Board (Pack of 4)

Sale price $19.99 Regular price $23.99
Save $4

x