WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU Programmable Development Board

  • $43.99
    Unit price per 
  • Save $6




Description:

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 800mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

DSTIKE Deauther Watch V2
What is it?
Deauther Watch is an ESP8266 development board, but you can wear it like a smartwatch.
This ESP8266 development board comes with a 800mAh lithium battery, OLED display and a 3-way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

DSTIKE Deauther Watch V2

Note:
Only support 2.4GHz
DSTIKE Deauther Watch and ESP32 Watch share the same screen board, but pinmap and breakout pads are different!

What makes it special?
Only ~80mA power usage
Up to around 8-10 hours work time
800 mA charging current
Indicate charging LED (25%,50%,75%,100%)
Included 5dB FPC antenna
Power Switch (Click to turn on, double click to turn off)
Protection: short, overcharging, over discharging, temperature
Added Extremely Accurate DS3231

GPIOs and Hardware Info:
Display: SH1106 1.3" OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
High Light LED: GPIO 16
Side Button: GPIO0,RST

Usage:
1. You can use it with display and buttons:
https://github.com/spacehuhn/esp8266_deauther/wiki/Setup-Display-&-Buttons
2. You can also connect to "pwned" with the password "deauther" and use the web interface:
https://github.com/spacehuhn/esp8266_deauther/wiki/Web
3. If you lost the password you can reset it:
https://github.com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset Disclaimer

Package Including:
1 * ESP8266 WiFi Deauther Watch V2 with 3D Printing Case and 800mAh lithium battery (Assembled)
1 * 5db FPC Antenna

We Also Recommend

RPI UPS Pack Standard v2.0

MakerFocus Raspberry Pi Expansion Board UPS Pack Standard Power Supply

Sale price $7.99 Regular price $9.99
Save $2
1000mAh 802540 3.7V Lithium Rechargable Battery

MakerFocus 4pcs 852540 3.7V 1000mAh Battery with JST1.25 Connector Lithium Rechargable Battery

Sale price $18.05 Regular price $18.99
Save $0.94
ESP32 Wifi development board with OLED

MakerFocus ESP32 Development Board with 0.96 Inch OLED WiFi Kit for Arduino ESP8266 NodeMCU

Sale price $11.99 Regular price $16.99
Save $5
2Pcs I2C OLED Display Module

MakerFocus 2Pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module

Regular price $9.99
DockerPi Power Board

MakerFocus DockerPi Power Board 20W with Fan Remote Control Compatible with Raspberry Pi 4/3B+

Sale price $20.89 Regular price $21.99
Save $1.10

x