MakerFocus 4pcs 852540 3.7V 1000mAh Battery with JST1.25 Connector Lithium Rechargable Battery
1. Note: The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
2. This product interface is 1.25 pitch male, it can be matched with ESP32 Development Board WIFI Kits for Arduino Nodemcu.
Standard Voltage: 3.7V
Rated Capacity: 1000mAh
Working Current: 1.5A
Overcurrent protection: 2~3A
Overcharge limit pressure: 4.25±0.05V
Over-voltage limit pressure: 2.45±0.30V
Standard Charging Method:
Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C.
Charge current time: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours).
The maximum charging current: 0.5C
Continuous Dishcarge Current: 0.5C
The maximum discharge current: 1C
End-off voltage: 2.75V/pcs
Allowable charging temperature: 0℃ ~ +45 ℃
Allowable discharge temperature: -10 ~ +60 ℃
Allowable storage temperature: -10 ~ +40 ℃( within 3 months); -10 ~ +30 ℃ ( within 6 months).
4 * 1000mAh 802540 3.7V Lithium Rechargable Battery
We Also Recommend
TP4056 Charging Module with Battery Protection 18650 BMS 5V Micro USB 1A 186 50 Charging Board
1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade
MakerFocus Raspberry Pi Battery Pack UPS HAT Board with 4 LED Power Indicator(2600mAh Battery)
2 pcs 3.7V 1600mAh JST lithium polymer battery with USB charging for JJRC A6 A20 A20W A22 H68 X27C-2 XG183 69608