1.8 inch Display Multi-function LCR-TC1 Transistor Tester
Transistor Tester TFT Diode Triode Capacitance Meter LCR-T6 LCR-TC1 ESR NPN PNP MOSFET
TC-V2.12k is a TFT graphic display Multifunction Tester.
Automatic detection of zener diode 0.01-30V
Self test with automatic calibration
Support Hitachi IR coding
IR waveform display
Infrared receiving instruction
Measurement results using TFT graphic display(160x128)
One key operation
Auto Power Off(Timeout Settable)
Built-in high capacity rechargeable Li-ion Battery
Li-ion Battery voltage detection
Support Chinese and English
Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source!
Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!
Key operational definitions
Multi-function key has two actions:
Short press: Press the key and not less than 10 ms, release key within 1.5 seconds
Long press: Press the key more than 1.5 seconds
In the power off state, short press the multifunction key, the tester is turned on and automatically measured.
Power on &amp;amp; measurement interface
In the power off state or the test is completed, put the test element into the transistor test area of test seat, and press the locking handle, short press the multifunction key, the tester automatically measure, graphical display of measurement results when testing is complete.
Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on!
Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
Test seat are divided into transistors and zener diode test area, detailed in 1.1 Description.
1 x Multi-functional TFT Transistor tester
1 x Electronic component set(Send Randomly)
3 x Test hooks
We Also Recommend
MakerFocus 2Pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module
4pcs I2C OLED 0.96 Inch OLED Display Module IIC SSD1306 128 64 LCD White for Arduino UNO R3 STM
MakerFocus Raspberry Pi 7 Inch Capacitive Touch Screen TFT LCD Display for RPI 4B/3B+ Drive-free
MakerFocus 1.5inch I2C OLED Display Module for Arduino/Raspberry/Jetson Nano/STM32