New Arrival

Raspberry Pi 4B Camera with Holder and Cable IR Camera Module 75 Degree 5MP Description:Our IR-CUT Night Vision Camera plugs directly into the CSI connector on the Raspberry-Pi, and features two high intensity Infrared LED spotlights for night time recording. Features:Camera:Built-in IR-CUT automatic switching...

Product descriptionColour: BlackSpecificationModel: Turbo EOS2Image Sensor: 1/3" CMOS SensorHorizontal Resolution: 1200 TVLTV System: NTSCIMAGE: 4:3Synchronization: InternalElectronic Shutter: NTSC: 1/60~100,000S/N Ratio: andgt;52dB (AGC OFF)Video Output: CVBSLens: 2.1mmMin. Illumination: 0.001LuxF1.2Auto Gain Control: YESBLC: YESWDR: Global WDRDNR: 2 DNRDimensions: 14mm*14mm*16mmWide Power Input: DC 3.3-6VWork Temperature: -20℃~+60℃Work Humidity...

Description:Hardware SpecificationsChipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor Flash: QSPI flash/SRAM, up to 4 x 16 MB Sarm: 520 kB SRAM + 8MBytes External SPRAM Key: Reset Dispaly: IPS Panel ST7789/1.3 Inch Power Indicator Lamp: Red USB to TTL: CP2104 Camera: OV2640 2Megapixel...

Description:Camera Module:Camera: OV2640Type: Fisheye lensCamera Resolution: 2 MegapixelArray Size: UXGA 1600 x 1200Power Supply: Core 1.2VDC + 5%Analog: 2.5 ~ 3.0VDCI/O: 1.7V to 3.3VPower Requirements: Active/125 mW (for 15fps, UXGA YUV mode)/140mW (for 15fps, UXGA compressed mode)Standby: 600µATemperature: Operation -30°C to 70°CRange: Stable Image...

ESP32 Camera WiFi+Bluetooth Module 4M PSRAM ESP32 5V Low-Power Dual-core 32-bit CPU with OV2640 2 Million Pixels Camera for Home Smart Device Map Wireless Monitoring and QR Wireless IdentificationFeatures:Low-power dual-core 32-bit CPU for application processorsMain frequency up to 240MHz, computing power up to 600...

Specifications:Pixel : 5 megapixelSensor : OV5647CMOS size : 1/4inchSensor best resolution : 1080p4 screw holes: used for attachment , connect 3.3V power outputFocal Length : 2.35Diagonal angle : 130 degreeDimension: 25mm x 24mm Feature:1. Fish eye wide angle lens2. Night vision camera3. 5 MP pixel4....

Description:This product is Raspberry Pi Camera Module, Supports Night VisionThis camera can Adjustable-Focus. Supports all revisions of the Pi 5 megapixel OV5647 sensor. Features:Raspberry Pi Night Vision Camera, supports all revisions of the Pi5 megapixel OV5647 sensor.Specifications:CCD size : 1/4 inchAperture (F) : 1.8Focal...

 Fisheye Night-vision Camera   Description:The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings are not required, plug-in then it can be used. The advantage is...

Product parameters:8 million pixel Photosensitive chip: MX219Resolution: 3280 * 2464Working Voltage: 3.3v-5vCamera parameters:CMOS size: 1/4 inchAperture (F) : 2.0Focal Length: 2.96mmDiagonal angle: 77 degreesDistortion: <1%Support 1080p30, 720p60 and 640 x 480p90 video recordingApplication scenarios: AI intelligent recognition, face recognition, image Identification, neural network identification, road...

Camera Features:Angle of view: 65 degreesThe focal length: 2mm and 4-5mmFixed focus: 1 m to infinityFrame rate: about 30fpsMaximun pixel: 5M (2592 * 1944 pixel static images)Camera volume: 11.3 * 2.3 * 2.6CMNote:1. Need to remove the protective film before you assemble the out...

Description:The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings is required!Note: There is a logo "3MP" on camera, sorry for that it's Mold's error,...

Specifications:Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz X tensa single-/dual-core 32-bit LX6 microprocessorFLASH: QSPI flash/SRAM, up to 4 x 16 MBSRAM: 520 kB SRAMKEY: Reset, IO32Display: 0.91 SSD1306Power indicator lamp: RedUSB to TTL: CP2104Camera: OV2640  2MegapixelSteering engine: Analog servoOn-board clock: 40MHz crystal oscillator Working voltage: 2.3V-3.6VWorking current: About 160mAWorking...

Overview:This is a camera module (without driver PCB) compatible with the official Raspberry Pi Camera Board V2, with 8-megapixel IMX219 sensor and features 160 degree field of view.If you got a Raspberry Pi Camera Board V2 and just want to try something new, here...

What this software can do?Power the board via USB type-C or GROVEUse your phone to Wi-Fi scan an AP name start with 'm5stack-' and click to connect this AP.Open up web browser on your phone and visit 192.168.4.1Then here comes the picture. Video is...